Our protective covers are all custom made at our supply facility in Germany. We have bellows, round bellows, WMB spirals, roller band covers and wipers in our range.

Powerful, efficient and sustainable PROtop combines the highest levels of efficiency and compact housing with high durability and direct parallel connection without diode modules. This reduces costs and creates space in the control cabinet. Thanks to the powerful DCL technology, even difficult loads such as motors can be operated without problems and circuit breakers can be reliably triggered. The good communication capability allows permanent status monitoring and complete integration into control systems.

Fast, uncomplicated and practical implementation of your development – ready for testing and further development through to series production. Rapid prototyping allows early identification and correction of design errors, which shortens development time and significantly reduces time to market. - Fast implementation thanks to close cooperation - Specific implementation for practical testing - Flexible adaptation to your requirements

The Automation-Line AL i.MX8M Mini LTE, based on Arm® Cortex®-A53 and Arm® Cortex®-M4, expands the product portfolio of existing Linux computers for DIN-rail mounting. The intelligent gateway with LTE connectivity offers extensive communication interfaces and, thanks to its robust housing, is ideally suited for demanding control tasks as well as mobile and wireless IoT solutions. A key feature is the LTE Cat1 module, which ensures a highly reliable and fast connection for IoT applications. It provides an excellent alternative when integration into the company’s internal network is not possible. As standard, the AL i.MX8M Mini LTE is equipped with the secure, hardened Linux®-based operating system KontronOS as well as KontronGrid, a comprehensive IoT device management solution for edge devices. This ensures the highest security standards and protection of sensitive data.

PRT2 precision track systems are the ultimate product for combined circular and linear motion. Hepco’s Track Systems are available in oval, rectangular, and “S” bend configurations with multi carriages allowing different assembly operations as part of one continuous system. All elements of the range are available in stainless steel, allowing for extensive use in the food, medical and scientific industries. Hepco’s track systems are a cost effective alternative to traditional conveyor systems.

PTFE is a high tech plastic with extraordinary properties. PTFE means Polytetrafluoroethylene. This material has become famous especially under the trademark Teflon of DuPont. Two of the excellent characteristics are the chemical resistance and the physiological innocuousness unrivalled by the other plastics. The temperature resistance also reaches very good values, i.e. almost 300 °C, and the conductivity values as well. Thus, this material is not only very appropriate for seals but also for technical components of every kind in the chemical, pharmaceutical and food processing industry.

Highly trained service technicians look after your pumps professionally and around the clock, from installation to maintenance and repair. As an independent service provider, we can look after you regardless of manufacturer and type. Our long-standing cooperation with a wide range of manufacturers guarantees us access to technical documentation such as sectional drawings and spare parts lists as well as the supply of original spare parts. From standard pumps to technologically sophisticated special pumps, all of them are reconditioned and tested at our service centre with the shortest possible delivery times. The documentation of the repair and thus the traceability as well as the warranty for our work are standard with us. You can also benefit from our expertise when replacing or purchasing new pumps. Our engineering team will be happy to advise you.

In cooperation with the industry associations Swissmem and GOP, trade fair organizer Easyfairs launched PUMPS & VALVES, creating a dedicated platform for exhibitors from the pump, valve, and process sectors. PUMPS & VALVES enables exhibitors to present their innovations, trends, and solutions in the field of pump and valve technology to a broad specialist audience. The trade fair not only provides inspiration, but also offers the perfect platform for business and knowledge transfer. Pumps & Valves will take place for the sixth time from December 1-2, 2027. For the fourth time, the trade fair will be held in parallel with the two trade fairs maintenance Schweiz and AQUA Suisse.

The LÜTZE M12 connectors with Push-In technology, offer lots of advantages for many control cabinet and machine and plant manufacturers because they allow fast and fault-free wiring of prefabricated cables. The tool-free and direct connection, which does not require previous opening of the contact point, guarantees fast wiring. Thanks to the new Push-In-Technology, the insertion forces are very low, which greatly simplifies the connection. In contrast, the pull-out forces are higher so that all connections guarantee a high level of wiring security. Depending on the application, the LÜTZE M12 connectors are suitable for transferring signals, data and power in various versions, either with a straight or angled connector, with the option of shielded or unshielded versions. The angled version allows the cable outlet to be positioned in 45° steps compared to the pole pattern. The LÜTZE M12 connectors with Push-In Technology have the same design as the screw terminal technology and are designed for more than 100 plug cycles. LÜTZE uses a clear color coding system for the wires during assembly. All colors in the connection block are assigned for the actuator sensor area and for the field bus wiring such as CAN-Bus, PROFIBUS, Ethernet and PROFINET, according to the corresponding standards EN 60947-5-2. This means that firstly, it is almost impossible to confuse the PINS, and secondly there is no more need for time-consuming and error-prone recoding of the individual color codes. Advantages: - Always the best connection technology for your M12 application - Simple and tool-free connection with push-in technology - Up to 30% time saving compared to the conventional screw terminal connection - Better contact in case of vibration and shock load due to permanent spring pressure - No conductor sleeves required

Robuste PW-Schutzfenster für Schaltgehäuse Zum Schutz von Anzeigen, Schalt- und Bedienkomponenten vor Verschmutzung, Nässe und unbefugtem Zugriff führt FIBOX robuste Instrument Protection Windows (PW) mit Abmessungen von 450x400x90 mm sowie 340x300x90 mm im Programm. Die Schutzfenster aus Polycarbonat lassen sich schnell und einfach auf Schaltgehäuse und Pultanlagen verschiedenster Art montieren. Damit bieten sie eine unkomplizierte Alternative zu aufwändig maßgefertigten Lösungen. Beide PW-Modelle bestehen aus einem Rahmen mit durchgehendem Scharnier und einer transparenten Abdeckung. Durch den großen Sichtbereich lassen sich die abgedeckten Schalt-, Anzeige- und Steuerkomponenten auch im geschlossenen Zustand jederzeit gut beobachten. Aufgrund der Innenhöhe von 85 mm werden zum Beispiel auch Schlüsselschalter sicher geschützt. Zur Montage wird der Rahmen einfach um die Bedienelemente angeordnet und innenseitig mit acht Schrauben befestigt. Dabei dichtet der Rahmen ohne weitere Maßnahmen mit dem darunterliegenden Gehäuse rundum sauber ab. Rahmen und Fenster sind rückseitig mit einer eingeschäumten PUR-Dichtung versehen. Die überlappende Konstruktion sorgt für eine erhöhte Festigkeit und Dichtigkeit, so dass bei geschlossenem Fenster eine Schlagfestigkeit von IK09 sowie die Schutzart IP66 bzw. NEMA 4X erreicht werden. Standardmäßig sind die Schutzfenster mit zwei Doppelbartverriegelungen ausgestattet. Auf Wunsch liefert FIBOX die Modelle auch mit Schlössern. Eine Produktpräsentation auf Youtube ist via https://youtu.be/chkp1gnxGC8 abrufbar.

Steel reinforced and synchronised telescopic slide with super-extension. Heavy duty. It includes a lock IN and OUT: when the drawer is in the closed position, a lock has to be pushed to open the slide, when the drawer is in the opened position, a lock has to be pushed to close the slide.

This reinforced telescopic slide has 3 galvanised steel elements and offers full extension. It extend both sides of the fixed beam. It is designed for heavy loads.

This reinforced telescopic slide has 3 galvanised steel elements and offers full extension. It is designed for heavy loads.

The combination of a milled dovetail profile and a screwed on toothed rack forms the rack and pinion drive Type SZA. The selectable gear ratios allows a use for every need. For example, you can adjust welding heads or measuring optics. On request different special versions are possible, please contact us.

From full rotation into linear motion