A large part of the business activity of the company WT consists in the revision of screwed plate heat exchangers. This includes cleaning the plates, resealing the heat exchangers and assembling them on site. For this purpose, the necessary material is brought to the location of the heat exchanger to be revised in the company's own truck. First the heat exchanger is screwed apart. A lot of dirt has accumulated on the plates inside the exchanger over time. The dirty plates are therefore removed and replaced by clean ones. With the help of an assembly press, a large plate heat exchanger can be easily pulled apart and screwed tightly together by a single employee. This process proves to be very cost-effective for the customer. The dirty panels are removed and brought back to WT, where they are cleaned, resealed and prepared for further use.

Flexible, contactless data communication Clear identification of objects through unique numbering Faster data management compared to paper solutions More accurate documentation processes - prevention of human error Robust and resistant to harsh environments and cleaning processes Low frequency (LF/125 kHz) - write-protected High frequency (HF/13.56 MHz) - rewritable

New possibilities for ST series safety sensors Pizzato Elettrica further expands its range of ST series RFID safety sensors with the introduction of the new ST H version. The ST H series RFID sensors are equipped with all the technical and operating features already available in the ST G series, including: M12 plastic or stainless steel connector; Multicolour signalling LED, visible from both sides of the housing; Multitag programming; Versions for wide temperature ranges from -35°C to +85°C. Magnetic holding of the actuator Devices of the ST H series can be configured with a permanent magnet incorporated inside the housing, able to generate a holding force between sensor and actuator. This way, the guard can be kept closed even where there are vibrations, after a recoil during closing, or in areas where air turbulence tends to open the lighter guards. The magnetic holding force can be selected among three different magnitudes, in order to adapt to any usage situation. Symmetrical housing, standard hole spacing The symmetry of the housing allows the same sensor to be used on both left and right doors; by simply rotating the sensor onto itself. The 78 mm mounting hole spacing facilitates the replacement of the traditional SR B magnetic sensors with an advanced RFID safety sensor. ADVANTAGES: All the already existing technology from the ST G series of sensors; User configurable magnetic holding force of the actuator; The symmetrical housing makes it easy to mount; Same mounting hole spacing (78 mm) as for SR B series devices; Compatible with all ST series actuators; The protection degrees IP67 and IP69K allow the use in the toughest conditions.

The family of installation contactors is characterized by excellent properties. • Long service life thanks to double-breaking contacts • Switching of different voltages with adjacent contacts • Hum-free operation • Areas of application: lighting installations, heating, air conditioning, pumps, etc. RIC - With AUX extension module RAC - With ON-OFF-AUTO function RBC - With step-by-step function; With AUX extension module; With additional modules CM/GM for central and group control

Compact, robust and highly precise solutions for tight spaces, with ratios from i=1 to i=6

The METZ CONNECT field assembled RJ45 field plug pro is the right choice for structured cabling with industry or data centers with high data transmission rates up to 40 GBit/s where high-performance and reliable connections are needed. The RJ45 field plug pro is available in a 180° straight and 360° angled, 4-pair and 2-pair version. It can easily be connected to all common cable types without much preparation and its new design allows it to be used in restricted spaces. It impresses with its robust zinc die-cast housing and protected latch for industrial use. Its compact design makes the connector multi-port capable while being fully shielded. The RJ45 field plug pro is designed for field assembly with-out the need for special tools. It is suitable for Power over Ethernet (PoE, PoE plus, UPoE and 4PPoE), HDBaseT or other multimedia applications as well as for industry standards such as PROFINET and EtherNet/IP.

The RJ45 network sockets meet the latest standards for data transmission rates and are available in socket-socket or socket-cable variants with male connector. Tested up to category 6 (10 Gb/s), they are the ideal solution for modern high-tech applications, in which machinery must be connected to company networks and process large files. The RJ45 sockets are available with a full shielding option for front and rear connection as well as with simple shielding on the output cable (the latter only for versions with rear cable connection). Effective internal shielding is useful in the event of any electromagnetic interference, which can disturb or compromise the quality of data transmission. Created to be used under the harshest environmental conditions, the RJ45 sockets have an IP67 degree of protection and are guaranteed by the integrated protection cap and the shaped ring at the base of the device which prevent the accumulation of dirt or other residues.

The miniature industrial contactors of the RMC series are reliable switching components for increased loads in industrial environments. Thanks to comprehensive accessories such as auxiliary contacts and motor protection units, they are suitable for a wide range of applications. They offer high performance with a very compact design. The switching capacity is an impressive 8.5A / 4kW (AC-3, motor load) with an installation width of just 35 mm. The installation position on a DIN rail can be either horizontal or vertical. The industrial contactors of the RSC series are reliable switching components for increased loads in industrial environments. Thanks to comprehensive accessories such as auxiliary contacts and motor protection units, they are suitable for a wide range of applications. With an installation width of 45 mm and switching currents up to 30 A and 65 mm up to 63 A (AC-3, motor load), the RSC series is extremely compact in comparison. The installation position on a DIN rail can be either horizontal or vertical.

ROBA®-DS The backlash-free, torsionally rigid shaft coupling for HBK torque transducers

The fastest and easiest offline programming (OLP) software. Compatible with any industrial robot brand, process or complexity, helping you maximize quality, robot utilization rate and production output.