From individual soldering components to fully automated production cells, mta robotics offers a complete and scalable range of selective soldering solutions for electronics manufacturing. Whether replacing manual soldering, automating a specific process step, or integrating a complete production cell, mta systems are designed to deliver precise, repeatable and reliable solder joints — even on complex assemblies and sensitive components. Depending on the application, mta combines the right soldering technology — iron, induction or laser — with flexible robot platforms and precise process control. The result is improved quality, greater consistency, reduced operator dependency and higher throughput. Compact, modular and built for industrial use, mta selective soldering solutions help manufacturers increase process stability and move confidently from manual operations to efficient automation.

Hanser’s indexing plunger selection is extremely diverse. And yet the standard parts experts continue to find new functional niches to fill: indexing plungers with chamfered pins. They are nearly universal elements that can be found anywhere that latching, locking and securing is required: indexing plungers. Despite the diverse range of types and dimensions, they previously all had one thing in common: The latching process typically makes use of a cylindrical hole that is aligned with the plunger pin, allowing the pin to engage without difficulty. For example, when a carriage travels past a latching hole. But there are also cases in which only an edge or a groove must suffice for latching, and it may not even be precisely positioned relative to the plunger pin. For such situations, Hanser has now developed a new type of indexing plunger that can independently latch into edges and grooves. This is made possible by a chamfered plunger pin. When the chamfered pin encounters a raised latching geometry, it retracts and then springs back out again once it reaches the latching point. Find out more online at: hanser.ch

Simple selfholding solenoid in open design with a currentless held end position thanks to built-in permanent magnet.

Parameter configuration, visualization and data archiving are carried out using the n-quirer TD software application. The adaptive tightening strategies compensate for fluctuations in head seating torque when driving thread-forming screws, ensuring constant clamping conditions and consistent preload — especially important for critical fastening applications.

Packaging equipment is designed to meet high-performance demands and increasingly stringent end-user requirements, including:​ ​High Performance: Modern packaging machines rely on sophisticated automation, needing precise and responsive sensing technologies. Our extensive range of sensor solutions ensures a perfect match for most packaging machine needs.​ Flexibility: Variability in packaging type, material, format, and size requires continuous adaptation of production lines. Our versatile photoelectric sensors, utilizing several advanced technologies, detect color-dependent materials, slim packages, dark surfaces, and transparent materials—enhancing machine flexibility while reducing the need for multiple machine variants.​ Cleanability: With growing food safety and traceability requirements, packaging machine cleaning is closely monitored. Our IP67, IP69K, and Ecolab-certified sensors withstand the rigorous cleaning processes typically applied to packaging machines in food processing environments.​ Machine & Operator Safety: Operator protection is ensured by ISO 13849-1 PLe compliant safety systems. Our IEC 62061 SILCL3 certified safety switches provide the expected safety performance while contributing to overall machine safety.​ Discover more about our solutions for packaging applications.

A NEW ERA IN DRIVE TECHNOLOGY: Capture your drivetrain data with utmost precision. Sensor integration redefined: R+W’s coupling solution enables precise acquisition of torque, speed, and temperature directly in the drivetrain. In response to rising demands driven by digitalization, automation, and IIoT, the iFlange system offers a future-ready solution already available today. Wireless data transmission via Bluetooth to gateway or app is combined with modular coupling configurations and a comprehensive range of accessories.

Strain gauge sensors for 1 to 6 axes to measure pressure, tension, force, weight, torque, strain, torsion, distance/path. We not only deliver the sensor, our service includes advice with a lot of experience and, if desired, configuration of the entire measurement chain including calibration of the sensor and amplifier, we deliver what the customer wants, regardless of whether only the sensor is ordered or one with a compatible and configured measurement amplifier is to be delivered. Our offer extends to the desired interface (0-10V, 0/4-20mA, RS232, RS485, USB, Profibus, Profinet, Ethernet etc.) to digital and analogue displays from small to large with a readability of up to 500 m.

Sensorless standstill monitoring The sensorless standstill monitor UG 9146 from the VARIMETER series is used for sensorless monitoring of electric motors for standstill. This means sensors such as encoders or proximity switches are not required. The standstill monitor measures the induced voltage of the coasting motor. If the induced voltage approaches 0, this means motor standstill for the device and the output relay is activated. With a width of only 22.5 mm, the UG 9146 can be installed in switch cabinets with limited space as well as in retrofit applications. - Simple retrofitting as sensorless - No external initiators required - Space-saving in the switch cabinet due to a width of only 22.5 mm

Innovative Sensor Solutions for Your Automation At autosen.com, you’ll find a wide range of high-precision sensors for industrial applications. Our product range includes: Vibration sensors for condition monitoring and early detection of machine wear Flow sensors for reliable monitoring of liquids and gases Pressure sensors for precise measurement and control of pressure conditions Humidity sensors for efficient climate control in production and storage areas Speed sensors, ideal for monitoring rotating machinery and preventing failures Our sensors are robust, durable, and easy to integrate—ensuring maximum efficiency and safety in your operations.

Machines must see and feel what is happening around them and in the system. There are sensors for all conceivable indicators, processes, movements and states. We keep an overview of the world of sensor technology for you. We support you with a top-of-the-line range for every automation requirement.

Absolute encoder with stainless steel housing from TR Electronic withstand aggressive environments. From now on, the proven series of absolute encoders from TR Electronic is also available in a stainless steel housing! Because special environments require special materials: The C__582 encoders retain their tried and tested geometry and thus also fit into the usual installation spaces as a resistant stainless steel variant. The encoder made of stainless steel 1.4404, AISI 316L is designed for use in aggressive environments: The surface is smooth, as status information and reset function are integrated into the software and the nameplate data is permanently lasered into the stainless steel surface. The uniform connector connection pattern on the side away from the shaft and a simplified flange/shaft geometry also minimize the contact surface for liquids and dusts. The encoder is available with a degree of protection up to IP 67, which also allows the encoder to be washed down. TR offers optical sensing up to 18 bit resolution within revolution with true multi-turn gearing that reliably senses revolutions in any operating condition. The actual values are transmitted via Industrial Ethernet (PROFINET, EtherCAT, Ethernet/IP). These interfaces offer extensive transmission options: Position and speed or rotational speed are available in real time; there is also extended status data for additional evaluations. With the standardized connectors, the user has access to a wide range of pre-assembled cables. Different sheath materials are suitable for different classes of materials. Thus, TR Electronic also has special solutions for special environments.

FAULHABER has launched a new generation of metal brush commutated motors, the 1024…SR series with a diameter of 10mm. In combination with a gearhead, its output torque can achieve 300 mNm, twice that of similar products on the market.Thanks to a superior torque/speed ratio (flat slope) the motor can handle varying loads at reduced speed variations, thus granting smooth control. This performance is achieved with very low noise and vibration levels. A wide range of matching speed and motion controllers, encoders, and gearheads allow for optimal adaption in high-demand applications like portable devices or optical equipment.