Intelligent, compact and freely programmable motor controller For brushless rotary and linear motors, voice coils, DC brush and step motors Motor supply / logic supply / STO supply: 12-80 VDC / 9 – 36 VDC / 18-40VDC Output current: 21.2A (15ARMS) nominal; 40A (28.3ARMS) peak Communication via USB, LV-TTL UART, EtherCAT, RS232, TMLCAN and CANopen interfaces STO inputs with safety integrity level SIL3/Cat3/PLe Size (L x W x H): 64 x 43.8 x 15.7 mm

Intelligent, compact and freely programmable motor controller For brushless rotary and linear motors, voice coils, DC brush and step motors Motor supply / logic supply / STO supply: 12 – 80 VDC / 9 – 36 VDC / 18-40VDC Output current: 21.2A (15ARMS) nominal; 40A (28.3ARMS) peak Communication via USB, LV-TTL UART, EtherCAT, RS232, TMLCAN and CANopen interfaces STO inputs with safety integrity level SIL3/Cat3/PLe Size (L x W x H): 93 x 43.8 x 30.4 mm

IRIS77 - Factory Operation System IRIS77 unifies production, quality, maintenance, and planning data in real time so leaders can decide faster on consistent facts. Early warnings surface deviations before they become downtime, scrap, or delivery risk. Visibility: KPIs/status | Alerts: anomalies/bottlenecks | Decision support: cause/impact/actions | Audit-ready history | Improvement: prioritize by effect.

The Iris aiOne™ is a complete, all-in-one ecosystem designed to provide the most comprehensive view of your asset’s health. By combining our most advanced and ruggedized Iris MA™ camera with the TrueSight™ analysis engine built with computer vision and artificial-intelligence techniques for rotating machinery, industrial pumps, and critical piping, the Iris aiOne™ platform delivers actionable answers with clarity and speed. TrueSight™ automatically identifies assets, benchmarks them against industry standards, and supports integrating traditional accelerometers for inaccessible points or bearing condition analysis. This all-in-one solution provides the complete picture of motion, empowering your team to solve complex problems and make critical decisions with absolute confidence, nearly instantly. Insight is the key to making sure you draw the right conclusions. RDI’s patented algorithms leverage every single pixel of the camera as individual sensors. This allows our TrueSight™ software to measure the true motion and calculate the true values of every component visible in the frame, eliminating the blind spots and guesswork inherent in traditional single-point measurements. TrueSight™’s power extends beyond visualization; it is a complete analysis platform. It seamlessly connects traditional accelerometer data with our video, creating a powerful all-in-one solution. It also serves as the engine for all our advanced capabilities, from Modal analysis to Rotational diagnostics, all within one intuitive interface. By transforming this massive amount of full-field and sensor data into a single, clear, understandable report of your asset’s health, TrueSight™ delivers more than just data; it delivers the confidence that comes from genuine insight.

RDI’s Motion Amplification® platform is a unique, revolutionary technology that detects subtle movement and converts movement to a level visible by the naked eye. By turning every pixel in the camera into a sensor, Iris CM™ takes millions of measurements in a fraction of a second. And it does this with no physical connection to your machinery or equipment. With Iris CM™, you now have the ability to see what is happening on your machines 24/7 even when you are away. Exclusive features are: • Scalable to any number of cameras. Monitor your entire process or facility with a network of cameras. • Each CM unit can communicate and trigger each other to provide synchronized video across multiple unit. • Quantify vibration, amplitude, frequency, and phase for anything visible in the recorded video. • Test and visualize your assets over periods of time for improved troubleshooting. • Multiple triggering options such as accelerometers, 4-20 mA sensor, and virtual camera measurements. Once configured, Iris CM can continuously monitor your asset with live Motion Amplification, trigger and store recordings, and provide all the data analysis of Motion Amplification software. Best of all, once you solve the problem with your asset, just move the system to the next asset and start all over. Solve your toughest problems, solve your intermittent problems, solve it with Iris CM.

Iris Edge™ combines PoE, a pan-tilt mount and auto focus to make deploying cameras for vibration monitoring easier than ever before while delivering all the benefits of Motion Amplification®. With Iris Edge™, users can monitor, trend, alert, diagnose, and troubleshoot an even larger field of view and provide the most flexible, scalable, and easiest deployment method for monitoring your assets. No need to contact your assets or even turn them off during installation, simple install a camera and monitor everything it can see. Key Benefits of Iris Edge™: - Easy and flexible deployment through PoE, pan-tilt and autofocus - Incorporate the full power of Motion Amplification® into your IoT strategy - Integrate vibration data into data systems through MQTT - Monitor multiple assets with one camera through user defined pan/tilt camera views and virtually unlimited measurement locations - Trend, historize and display data through easy-to-use dashboards

Combining the mobility of Boston Dynamics’ Spot® with the exceptional visibility of RDI Technologies’ Motion Amplification®, the Iris Explorer™ Spot Payload allows industrial customers to take next-generation vibration analysis right to the asset in even the most remote or hazardous environments. Enterprise asset management programs now have a high volume, highly repeatable route-based vibration analysis solution with dynamic mobility and teleoperation capabilities. Measuring deflection, displacement, movement, and vibration not visible to the human eye autonomously, Iris Explorer minimizes risk, helps maintain compliance and increases asset ROI for improved asset reliability and performance.

Iris M™ from RDI Technologies® is the first device of its kind that allows users to see - in real time - motion that is invisible to the human eye. The proprietary Motion Amplification® software lets you see the invisible. The Iris M platform from RDI Technologies monitors critical manufacturing operations, processes, quality and structural components that affect plant reliability and productivity. Iris M is a unique, revolutionary technology that detects subtle movement and converts that movement to a level visible with the naked eye. By turning every pixel in the camera into a sensor, Iris M takes millions of measurements in a fraction of a second. And it does this with no physical connection to your machinery or equipment. The Iris M technology platform delivers real-time video to users, enabling them to make instant decisions about manufacturing operations based on real data. The ability to visualize the entire process while retaining component level analysis makes Iris M the perfect tool for screening, fault finding, baseline or commissioning and pre/post repairs or retrofits. Every step of the way, Iris M provides specific information about the process or issues at the root of a quality problem. Iris M’s proprietary Motion Amplification® software produces easy to understand videos of the actual movement across your equipment or machinery which enables far more effective communication between technical and non-technical personnel, enhancing decision-making. Videos from the Iris M platform are produced within seconds of data collection. In other words, Iris M saves you time and money.

Isolation materials reduce the diffusion of heat. They are thus deployed where energy has to be saved or where the environment has to be protected from a heat source. In the broadest sense, they therefore are seals, whereupon the "medium" - unlike the traditional sealing situations - is the heat, which has to be stemmed. For our products, only fibres of glass and silicon oxide are used. Isolations made of these materials are harmless for health.

IXON IX6000 Secure Edge Pro Ethernet Gateway. IXON’s advanced SecureEdge Pro gateway takes machine connectivity to the next level. The gateway makes it easier and more secure than ever for machine builders to stay connected to their machines and customers.

Super compact JEDEC Tray Feeding solution hosting 30 thin or 20 thick JEDEC Trays. This feeder usually is taken as a base design for customization of other size trays.

The JetCleaner Classic CL-8130 from Hydroscand is a robust and proven cleaning system for hydraulic hoses and lines. Using cleaning projectiles, dirt particles, chips and residues are reliably removed from inside the hose lines – quickly, easily and directly on site. The set is ideal for workshops, service vehicles, maintenance work and hydraulic assembly. The robust aluminium gun is lightweight, ergonomic and designed for daily use in demanding environments. Your benefits: • Fast and easy cleaning of hydraulic hose lines • Removes particles, chips and contamination from inside the hose • Robust JetCleaner Classic gun made of aluminium • Ergonomic handling for mobile and stationary use • Suitable for hose lines from 3/16" to 2" • Includes 11 standard hose nozzles • Supplied in a practical transport case

Jet valve DV-6110 for micro-dosing of adhesives, greases, oils