The digital holographic measurement system HoloTop NX enables micrometer-accurate quality control of precision components. Thanks to its compact design, it enables 3D inline measurements directly in multi-axis systems. The sensor can be installed on a number of different platforms. Using multiwavelength digital holography, HoloTop NX maps the topography even of rough object surfaces with interferometric accuracy. The sensor captures an area of 12.5 × 12.5 mm² within 500 ms. Even deviations of a few micrometers can thus be reworked directly in the machine tool without the need to first reposition the workpiece. The acquired images are processed particularly quickly, while data preprocessing guarantees good robustness to vibrations.

The HORST800 G2 combines an 800 mm reach with a compact footprint and high dynamic performance. Thanks to its maximum manoeuvrability, it is ideally suited to machine tending, small-parts handling and quality control processes – even in confined spaces. Its slender boom reaches deep into machines and reliably picks up parts from boxes, whilst maintaining consistently high precision and speed. Its versatility and intuitive, AI-supported control system make it the first choice for demanding robot cells – flexible to install and ready for immediate use.

Our complementary HMI development enables intuitive, ergonomic and application-optimised user interfaces that make everyday life easier. From the initial idea to series production, we develop comprehensive HMI systems from a single source. For example, for better readability, reduced energy consumption and suitability for a wide variety of interfaces. - Complete solutions from input to evaluation - Fast implementation by interdisciplinary teams - Ergonomic and user-centred designs

Smart humidity sensing for reliable condition monitoring and process control.

Mit HyBlade®, einer innovativen und derzeit einzigartigen Hybrid-Struktur für Ventilatorschaufeln, definiert ebm-papst die Stärken großer Axialventilatoren neu! Dabei sorgt die Verbindung einer Aluminium-Trägerstruktur mit einer Hülle aus glasfaserverstärktem Kunststoff nach aerodynamischen Kriterien für völlig neue Maßstäbe. Vor allem ermöglicht die strömungstechnisch optimierte Form enorme Geräuschvorteile bei noch höheren Wirkungsgraden gegenüber herkömmlichen Flügeln.

Switching of high inductive and capacitive loads The hybrid relay RK 3070 from the POWERSWITCH series is used to switch inductive or capacitive loads, for example energy-saving and LED lamps or switching power supplies with high inrush currents. A triac switches on at the zero crossing of the AC voltage. The continuous current is then conducted via the parallel-connected relay contact, thereby minimising power loss. This combination allows high inrush currents to be switched without contact bounce or arcing. This ensures a significantly longer service life. Typical areas of application are in the automation and process industry as well as in wind turbines. - Long service life due to hybrid technology - Space-saving with a width of only 17.5 mm - Load current up to 20 A

The reliability of hydraulic and pneumatic components is strongly dependent on the deployed sealing systems. The requirements sealing systems have to meet in this context are varied. They depend on the medium in place, the pressure and temperature conditions, the reciprocal movements and the chosen construction type of the component

The hydraulic battery-operated cutter B-TC500ND-SC with double piston hydraulic was developed for cutting copper, aluminum and telephone cables up to a maximum diameter of 50 mm (e.g. 4 x 150 mm2 NYY-0). The special cut and the special geometry of the cutting blades guarantee a «straight cut». Because of the snap closure on the head, the tool can also be used to cut endless material. The good handling is optimally guaranteed by the 90° rotatable head. The open head makes it easier to work in places that are difficult to access.

Hygiene concepts must be Tailor. Whether complex built buildings or even simple family houses. Each building was designed and built under complex requirements. The Miteinbezug of processes, objectives of the user community and the emotion that should arise upon entering, make the construct unique. So it is with the inner life. Many forget that mechanical ventilation systems were designed and installed exactly as the specific project, such as the construction project itself. Challenge of the service lies in the Individualitätsbetrachtung. Commodity is past. (Karin Bucher, hygiene inspector Kat. A to 6022) What if ... You could make an object? Our hygiene concept, you have the chance. Our team develops an individualized program adapted to the current state, the needs of your plants, the need for their maintenance and a reliable cost ceiling. The planning, administration, preparation and order processing is based on an automated process, we check for you. Of course only if you want. Interested? Karin Bucher tells you more accurate.

The visually appealing stainless steel Panel is ideally suited for use in hygienically demanding areas such as the food industry and pharmaceutical production. In order to produce impeccable food and medication, high hygiene standards must be met GMP requirements are met. The well thought-out design without joints and edges and the use of hygienic screws make cleaning easier. The beveled, smooth surfaces and rounded edges of the Automation Hygienic Panel allow liquids to drain off unhindered and prevent dirt and bacteria from settling. Thanks to sophisticated cooling, the completely closed system works completely without fans and ventilation slots. Due to the housing construction according to protection class IP69, no liquids or dust can penetrate the device. The Touch Panel with hygienic design meets all the requirements of the EHEDG for more hygienic design Machines and is CE certified. All materials that can come into direct or indirect contact with the products are FDA-compliant and withstand the use of typical cleaning agents, disinfectants and high-pressure cleaners. This means that the Panels are also suitable for use in GMP-regulated areas.

What is Unified Operations Center? From data streams to video feeds, from OT to IT to ET, convergence is key to making sense of a growing amount of diverse information assembled from across the business. With AVEVA Unified Operations Center, you can converge and visualize a combination of production metrics, maintenance analytics, engineering documentation, financial performance or anything in between. This data-derived intelligence links questions and answers with action, so teams can collaborate to solve enterprise-impacting problems quickly.

Maximum efficiency in the control cabinet Complete your projects with maximum performance. u-remote speeds up your installation process and gets your machines up and running faster. Thanks to the fully pluggable system, you can rely on intuition and error-free operation. Score points with your customers with maximum machine and system availability. u-remote is the most user-friendly I/O concept on the market, with which you can combine powerful automation with optimal system handling. This gives your machines an impressive range of functions that significantly minimizes the effort required for commissioning and maintenance.

Introducing the i4H, OMRON’s newest SCARA robot Achieve more by seamlessly integrating the robust i4H into your production line today. Unique features enable OMRON’s latest SCARA line to meet today’s demands of mass customization. It also allows manufacturers to produce high mixes of products at low volume which provide a wider array of goods to people. Key features −15 kg payload capacity. − 650, 750, 850mm reach options − Standard & Long Quill lengths − Visual display on base − Health lighting indicators

The i650 motec frequency inverter for wall mounting and motor mounting in protection class IP66 (UL Type 4X indoor) is the optimal decentralized drive solution. The inverter can be extended for universal use with an extension box with disconnect switch with/without Type E combination motor controller and operating elements. The i650 motec frequency inverter stands out from the i550 motec due to its extended range of functions: For simple automation tasks, a logic PLC based on CODESYS in accordance with the IEC 61131-3 standard is integrated in the i650 motec. Table positioning is available for the realization of independent axes and machine modules. The “Extended Safety“ option (safety technology with various functions) rounds off the overall package. The requirements of the Ecodesign Directive, Standard EN IEC 61800-9-2, are met. Application areas: Conveyor drives, traveling drives, winding drives, hoist drives, extruders, packaging machines, pumps, fans, ... Highlights: - Compact solution for decentralized drive technology, wall-mounted or motor-mounted, with high protection class IP66 (UL Type 4X indoor) - Wall-mounted expandable: Extension box with disconnect switch with/without Type E combination motor controller and operating elements - Fast mounting due to pluggable, standardized connections (plug & play) - Four IO-Link ports with limited IO-Link master functionality for easy data exchange between IO-Link sensors and actuators - Integrated regenerative module for very high energy efficiency - a brake resistor is no longer required - Extended range of functions: Logic PLC Table positioning "Safe Torque Off (STO)" via CIP Safety