We combine proven standard products with customised, cost-optimised drive solutions – perfectly tailored to your requirements. From evaluation, design and validation to product certification and support. - Customised drive systems - System integration and optimisation - Prototypes and accompanying studies Project example (full story available in the download area): Antrimon developed a unique valve actuator for a global equipment manufacturer facing extreme operating conditions. The requirements were demanding: operation in ATEX and IECEx Zone 22, ambient temperatures from 5 to 50 °C, lifetime exceeding 10 million cycles, high continuous and acceleration torque at low speeds, minimal heat generation and maximum energy efficiency – all in a compact design with worldwide certifications (ATEX, IECEx, CE, UL). No such solution existed on the market. Antrimon’s answer was a fully customised brushless outer-rotor motor combined with a two-stage planetary gearbox. The design focused on delivering maximum torque at the lowest speed, exceptional robustness and reliability. With a maintenance-free concept – no brushes, no oil changes – the actuator is built for continuous heavy-duty operation. The entire process, from feasibility analysis and mechanical/electronic design to prototyping, extreme-condition validation, certification and series production, was handled in-house. The result: significantly lower energy consumption compared to pneumatic systems, extended maintenance intervals, improved process safety and full global compliance. This solution gives the customer a clear competitive edge in international plant engineering. Antrimon is the only provider worldwide able to deliver such a certified solution economically from concept to series production.

Antrimon Group AG has a global and broad network of business partners. Electric motors, drives and gearboxes of the most diverse technologies are manufactured for us in various production facilities around the world. This means that projects can be approached completely independently of technology. The focus is on the optimal solution for your application. We will be happy to support you in the evaluation and design of your drive.

Key Industry Technology for Industry with the SAM 4.0 Controller The next generation of compressed air management master system, the SIGMA AIR MANAGER 4.0 (SAM 4.0) utilises adaptive 3-Dadvanced Control to make air generation and treatment even more intelligent, reliable and efficient. The 3-Dadvanced Control analyses all operating data on an ongoing basis, simulates alternative actions and calculates the perfect compressor combination. The result: Unprecedented energy efficiency. Maintain an overview at all times thanks to easy operation, visualisation and analysis. With secure network technology – conveniently from any PC. Predictive Maintenance by HPC KAESER specialists prevents unplanned downtime. The SIGMA AIR MANAGER 4.0 is designed to grow with your air station. A simple software upgrade allows expansion of the master controller without the need for additional investment in new hardware. Advantages Smart: The SIGMA AIR MANAGER 4.0 not only registers switching losses, but all factors that affect your compressed air station. It then uses the gathered information to calculate the achievable optimum performance values and controls all connected components accordingly Secure: Together the SIGMA AIR MANAGER 4.0 and the powerful Ethernet HPC KAESER SIGMA NETWORK form a future-dynamic infrastructure that meets all requirements for a highly-secure industrial control system Efficient: Continuous fine adjustment with a view to achieving optimum energy efficiency (energy management in accordance with ISO 50001) and the option of predictive, demand-oriented maintenance keep life cycle costs to an absolute minimum

The DTS+ track system incorporates key features of Hepco’s PRT track system and original DTS, combining them with a high load capacity connection for carriages to the drive belt. The carriages will not disengage from the belt, allowing transmission of higher driving forces compared to the original DTS conveyor system. Whilst the original DTS will often be the right choice for many applications, the DTS+ is suitable for applications with high loads, a vertical orientation, or where the free space inside the track circuit is required to integrate additional equipment.

The DTS2 High Speed Driven Track System has been developed for high-speed applications. The use of a scroll drive allows rapid indexing to be achieved with superior positional accuracy without the risk of carriage disengagement. The track system is available with three sizes of slide section (25mm, 44mm and 76mm).

DuoDrive is a revolutionary integrated gear unit/motor concept in hygienic wash-down design. It combines the high-efficiency IE5+ motor and a single-stage helical gear unit in one housing. Thanks to its optimised system efficiency, high power density and very low noise emissions, it is especially suitable for users in the fields of intralogistics, food and pharmaceutical industries. Together with its simple plug-and-play commissioning, the complete DuoDrive solution results in a significant reduction in Total Cost of Ownership (TCO) compared to other drive systems.

The DYNAMAG is a dynamic linear solenoid for short-stroke electrical applications in mechanical engineering.

The DYNAMAG short-stroke solenoid is the simplest solution for electrically implementing short strokes in machines. It is the result of a collaboration between the two innovative Swiss companies Cyltronic AG and Isliker Magnete AG. The integrated electronics in the DYNAMAG reduce the energy consumption in the end positions to a minimum. This allows high forces to be generated without the actuator becoming hot. Cycles of up to 250 cycles / minute can be achieved with the dynamic solenoid. The high forces of up to 32N can be offered in 4 stroke lengths of 10mm, 15mm, 20mm and 25mm. With the reverse stroke function, the forces can be applied both pulling and pushing without the need for a spring return. The highlight is the integrated end position sensors which transmit the end position signals directly to the control unit, thus ensuring cost-effective implementation.

The JBC dynamic inclination sensor offers an innovative solution for accurate angle measurement, even in the event of disturbances such as a vehicle starting or braking, or vibrations and shocks. The device detects acceleration and rotation in three dimensions, as well as temperature data. By filtering out motion disturbances, the Kalman filter ensures accurate inclination values even in the most dynamic of applications.

LINE TECH dynamic modules are ready-to-install linear axes driven by racks (DM…ZS…) or toothed belts (DM…ZR…) for the highest demands on dynamics and service life. The dynamic modules can achieve very fast cycle times under high loads. Thanks to the special design of the extruded aluminum profile, the very torsion-resistant base body is also suitable for self-supporting applications. Two sizes (DM2… and DM3…) are currently available.

The battery-free e-paper label, also known as the electronic shelf label, is increasingly being used in modern production and logistics processes. Information such as order and product data, QR codes, storage locations and more can be flexibly designed and transferred to the e-paper via NFC. The labels can be written on as often as required and in a short space of time, without the need to print paper labels. By dispensing with batteries and paper, this solution is also sustainable. The combination of an e-paper tag with a PDA or MES system, for example, offers enormous advantages in terms of productivity and quality. - Cost savings - Live data in production - Sustainability - Paperless identification - Can be combined with ERP, PDA and MES systems - No need to replace the battery

Whether for your intranet catalog or marketplace, we deliver exceptionally high-quality data both domestically and internationally. For our B2B customers, this is generally a free service, provided no third-party services are required.

This new reinforced telescopic slide has 3 galvanised steel elements and is fully extendable. It is designed to withstand extra heavy loads.

E3.series provides a leading single-platform solution to take electrical and fluid control designs from concept to manufacture. E3.series encompasses functional design, detailed schematics (electrical and fluid), wiring and tubing diagrams, through to control cabinet and wire harness layout in 2D and 3D. All applications are driven by an intelligent database that enables electrical, and logical checks that ensure correct connections by design. E3.series connects to leading MCAD design platforms to streamline the creation of digital twins. It transforms product development with electrical data management solutions seamlessly connecting to existing PLM and PDM systems. The enterprise-level options simplify collaboration between teams of all sizes working across the globe.