Our EYSeal dispensing system was specially developed for the targeted wetting of internal contours and sealing surfaces with lubricants. It impresses with its highest precision, repeatability, and process reliability. As a handheld solution, EYSeal enables the operator to apply lubricants easily, ergonomically, and in a controlled manner, making it ideal for use in manual production. For use in an automated station, EYSeal can be easily integrated into existing systems. Controlled via a PLC or customer-specific interfaces, the system reliably performs repeatable dispensing tasks, even at high cycle rates.

Das EYSpinn Dosiersystem ist die innovative Lösung für das kontaktfreie Applizieren von Schmierstoffen auf Innenkonturen, präzise, prozesssicher und materialschonend. Besonders bei schwer zugänglichen Geometrien, rotationssymmetrischen Bauteilen oder empfindlichen Oberflächen spielt EYSpinn seine Stärken voll aus. Mithilfe einer rotierenden Düse wird der Schmierstoff durch Zentrifugalkraft gleichmäßig an der Innenwand des Bauteils verteilt, ganz ohne mechanischen Kontakt und Medium-Verschleppung. So entsteht ein geschlossener, definierter Schmierfilm, der reproduzierbar und sauber aufgetragen wird.

The EYMulti is an electrically operated, volumetric metering valve that enables particularly precise, repeatable, and media-independent metering of lubricants. Thanks to the speed-controlled conveying technology, the metered quantity can be precisely and reproducibly controlled, regardless of temperature, viscosity, or ambient conditions.

DR / DRS2 Series – Compact Electric Actuators The DR and DRS2 series combine a compact ball screw mechanism with an αSTEP AZ Series hybrid stepper motor featuring a mechanical multi-turn absolute encoder. They are ideal for precise linear motion in space-saving applications – without requiring an external feedback system. Mounting Types • With spindle guide (guided type) • Without spindle guide (unguided type) Screw Types • Rolled or ground ball screws • Repeatability: ±0.01 mm (rolled), ±0.003 mm (ground) Frame Sizes • 20 mm, 28 mm, 42 mm, and 60 mm Stroke Lengths & Leads • Model-dependent; typical strokes between 30–50 mm • Lead options from 1 mm to 8 mm Electromagnetic Brake • Optional for vertical use – securely holds the load in case of power loss Control & I/O Options • Pulse-direction input, digital I/O, RS-485 • Fieldbus support: EtherCAT, EtherNet/IP, PROFINET, Modbus RTU

Position sensor for hydraulic cylinders with measuring lengths up to 2500 mm Draw-Wire Encoder SGH25 Absolute wire-actuated sensor for position measurement and speed measurement in hydraulic cylinders, telescopic cylinders, and piston accumulators. Durable, reliable, and easy to integrate, based on over 30 years of experience in wire-actuated sensor technology.

New PSBN055, PSN055 and PSFN055 compact precision gearboxes from Neugart The increasing demand for compact servo drives in mechanical engineering has led to a corresponding need for smaller gearboxes that are suitable for these drives. In response to this market need, Neugart is introducing three new precision planetary gearboxes in frame size 055: the PSBN055, PSN055, and PSFN055. These new additions extend the proven capabilities of the Precision Line portfolio. The three new models, PSBN055, PSN055, and PSFN055, are helical gearboxes from the Precision Line PSN, PSFN, and PSBN series in frame size 055. Please note that the frame size refers to the square dimension or centering collar diameter of the output flange, which in this case measures 55 mm in width. Despite their compact dimensions, the gearboxes offer high torque density and high precision in the smallest of installation spaces. These gearboxes are well-suited for use in electronically controlled servo drives of small handling units in packaging and many other machines. All three new developments are available with one or two stages and a range of ratios from i=3 to i=100. These models feature a rotary shaft seal and are rated to protection class IP65. Moreover, their planetary carriers feature a cage design, which greatly enhances the construction's torsional stiffness. Additionally, the torsional backlash can be reduced by 2 arcmin at the customer's option. Individual design details While the three new models share many similarities, they also feature key differences that make them ideal for specific applications. The PSBN055 and PSN055 models feature a smooth output shaft (with either a smooth design or a feather key), a square-type output flange, and robust deep groove ball bearings or preloaded tapered roller bearings. The PSBN055 impresses with its economy and efficiency.

AS-Interface (ASi) has long been an established feature of drive control. This is where the advantages of the globally standardized wiring system are especially conspicuous: the simplest installation thanks to the piercing technology, free selection of topologies, high flexibility and low costs. For many years Bihl+Wiedemann has been offering the ideal drive solution for many different applications – including roller drives, AC drives with and without frequency converter, as well as for 24 V motors. Our range of solutions is focused on leading manufacturers such as Lenze, SEW-Eurodrive, Itoh Denki, Interroll, NORD DRIVESYSTEMS and RULMECA. We also develop custom ASi solutions on request.

We combine proven standard products with customised, cost-optimised drive solutions – perfectly tailored to your requirements. From evaluation, design and validation to product certification and support. - Customised drive systems - System integration and optimisation - Prototypes and accompanying studies Project example (full story available in the download area): Antrimon developed a unique valve actuator for a global equipment manufacturer facing extreme operating conditions. The requirements were demanding: operation in ATEX and IECEx Zone 22, ambient temperatures from 5 to 50 °C, lifetime exceeding 10 million cycles, high continuous and acceleration torque at low speeds, minimal heat generation and maximum energy efficiency – all in a compact design with worldwide certifications (ATEX, IECEx, CE, UL). No such solution existed on the market. Antrimon’s answer was a fully customised brushless outer-rotor motor combined with a two-stage planetary gearbox. The design focused on delivering maximum torque at the lowest speed, exceptional robustness and reliability. With a maintenance-free concept – no brushes, no oil changes – the actuator is built for continuous heavy-duty operation. The entire process, from feasibility analysis and mechanical/electronic design to prototyping, extreme-condition validation, certification and series production, was handled in-house. The result: significantly lower energy consumption compared to pneumatic systems, extended maintenance intervals, improved process safety and full global compliance. This solution gives the customer a clear competitive edge in international plant engineering. Antrimon is the only provider worldwide able to deliver such a certified solution economically from concept to series production.

Antrimon Group AG has a global and broad network of business partners. Electric motors, drives and gearboxes of the most diverse technologies are manufactured for us in various production facilities around the world. This means that projects can be approached completely independently of technology. The focus is on the optimal solution for your application. We will be happy to support you in the evaluation and design of your drive.

Key Industry Technology for Industry with the SAM 4.0 Controller The next generation of compressed air management master system, the SIGMA AIR MANAGER 4.0 (SAM 4.0) utilises adaptive 3-Dadvanced Control to make air generation and treatment even more intelligent, reliable and efficient. The 3-Dadvanced Control analyses all operating data on an ongoing basis, simulates alternative actions and calculates the perfect compressor combination. The result: Unprecedented energy efficiency. Maintain an overview at all times thanks to easy operation, visualisation and analysis. With secure network technology – conveniently from any PC. Predictive Maintenance by HPC KAESER specialists prevents unplanned downtime. The SIGMA AIR MANAGER 4.0 is designed to grow with your air station. A simple software upgrade allows expansion of the master controller without the need for additional investment in new hardware. Advantages Smart: The SIGMA AIR MANAGER 4.0 not only registers switching losses, but all factors that affect your compressed air station. It then uses the gathered information to calculate the achievable optimum performance values and controls all connected components accordingly Secure: Together the SIGMA AIR MANAGER 4.0 and the powerful Ethernet HPC KAESER SIGMA NETWORK form a future-dynamic infrastructure that meets all requirements for a highly-secure industrial control system Efficient: Continuous fine adjustment with a view to achieving optimum energy efficiency (energy management in accordance with ISO 50001) and the option of predictive, demand-oriented maintenance keep life cycle costs to an absolute minimum

The DTS+ track system incorporates key features of Hepco’s PRT track system and original DTS, combining them with a high load capacity connection for carriages to the drive belt. The carriages will not disengage from the belt, allowing transmission of higher driving forces compared to the original DTS conveyor system. Whilst the original DTS will often be the right choice for many applications, the DTS+ is suitable for applications with high loads, a vertical orientation, or where the free space inside the track circuit is required to integrate additional equipment.

The DTS2 High Speed Driven Track System has been developed for high-speed applications. The use of a scroll drive allows rapid indexing to be achieved with superior positional accuracy without the risk of carriage disengagement. The track system is available with three sizes of slide section (25mm, 44mm and 76mm).

DuoDrive is a revolutionary integrated gear unit/motor concept in hygienic wash-down design. It combines the high-efficiency IE5+ motor and a single-stage helical gear unit in one housing. Thanks to its optimised system efficiency, high power density and very low noise emissions, it is especially suitable for users in the fields of intralogistics, food and pharmaceutical industries. Together with its simple plug-and-play commissioning, the complete DuoDrive solution results in a significant reduction in Total Cost of Ownership (TCO) compared to other drive systems.

The DYNAMAG is a dynamic linear solenoid for short-stroke electrical applications in mechanical engineering.

The DYNAMAG short-stroke solenoid is the simplest solution for electrically implementing short strokes in machines. It is the result of a collaboration between the two innovative Swiss companies Cyltronic AG and Isliker Magnete AG. The integrated electronics in the DYNAMAG reduce the energy consumption in the end positions to a minimum. This allows high forces to be generated without the actuator becoming hot. Cycles of up to 250 cycles / minute can be achieved with the dynamic solenoid. The high forces of up to 32N can be offered in 4 stroke lengths of 10mm, 15mm, 20mm and 25mm. With the reverse stroke function, the forces can be applied both pulling and pushing without the need for a spring return. The highlight is the integrated end position sensors which transmit the end position signals directly to the control unit, thus ensuring cost-effective implementation.