Progress® ultraFLAT One cable gland - four application areas Clean room, food industry, anti-vandalism, design applications

We create comprehensive concepts for machine control automation and/or the production processes of new and existing systems. What we offer: Requirement and process analyses Preparation of requirement specifications Development of solution concepts Project support Hard- and Software development Systems planning Documentation, instruction Safety-related consultation and implementation Our project managers support you from Planning and Construction via Installation all the way to Commissioning, and are available for support at any stage during the operating phase. We realise system-independent solutions for our customers. The following systems serve us as references from satisfied customers. ECAD / CAE: CADDY (SEE ELECTRICAL) E-PLAN (P8, PRO PANEL) ELCAD (ROTRING) PROGRAMMABLE MEMORY CONTROLS SPS SIEMENS S5 UND S7 / TIA-PORTAL ROCKWELL PLC5, SLC500, CONTROLLOGIX, STUDIO 5000 SYSTEMINTEGRATOR MODICON MODSOFT, SCHNEIDER ELEXTRIC SOMACHINE MITSUBISHI MEDOC (OTHERS UPON REQUEST) BECKHOFF TWINCAT (SOLUTION PARTNER) EATON SUCCOSOFT, CODESYS, XSOFT, EASY (SYSTEM PARTNER) Command level / visualisation: SIEMENS WINCC, WINCC FLEXIBLE, PROTOOL GE FANUC CIMPLICITY (SOLUTION PROVIDER) ROCKWELL FT FIEW, RSVIEW32 (SYSTEMS INTEGRATOR) CTC INTERACT, SCHNEIDER ELECTRIC SOMACHINE, WONDERWARE, INTOUCH EATON XSOFT (SYSTEM PARTNER) OTHERS UPON REQUEST

In specific application areas with agressive media and high temperatures, standard elastomers like NBR, Viton® or EPDM cannot stand up to the requirements any more. Perfluorelastomers are top-class materials. They are extremely resistant against acids, amines, bases, ultra-pure de-ionized water, vapour, solvents and detergents. Even at high temperatures, seals made of Prolast-O® remain operational and therefore prolong the maintenance intervals and increase safety. KUBO produces seals made of FFPM/FFKM Prolast-O® for the highest requirements on its own premises in Effretikon, near Zurich. With our many years of experience and our vast stock of tools we can produce the required seal within a short time. WHY CHOSE PROLAST-O® ? Fast delivery (2-3 weeks, in case of existing tools) Own tool construction and production of moulds in Effretikon Vast stock of tools (particularly for standard dimensions) Longstanding experience Quality assurance with automatic optical measurement of O-rings Highest chemical resistance Food and pharma conformities Highest temperature resistance Low compression set Small quantities starting from 1 piece PROLAST-O® PRODUCTS O-rings and other moulded parts: Micro O-rings and micro parts Interior diameter > 0.5 mm Cross section diameter > 0.5 mm Maximum size of O-rings/moulded parts Ø 500 mm Smaller or bigger dimensions upon specific customer request O-rings with larger interior diameters can be butt joint vulcanized from cords upon request. Our premium product for large O-rings are our Gigant-O® Delivery time 2-3 weeks, in case of existing tools COMPOUNDS Four different FFPM compounds are available as a standard.

therNet/IP to PROFINET IO Device Gateway. Supply 24V DC Embedded EDS Add-On Profile allows for simplified integration and reduced configuration time for Rockwell Automation PACs. No ladder programming is required when using I/O connections. Multiple I/O connections allow you to set different RPIs for status and control data, enabling Ethernet bandwidth optimization. Communication via an I/O connection provides guaranteed data delivery and enables the PAC to monitor for communication faults. SD card slot (SD card optional) is used for storing configuration files in the event of a disaster. ProSoft Discovery Service allows your PC to find the gateway and change its default IP address without being on the same subnet. Video setup tutorial provided at psft.com/Ap5

Due to various feedback from customers we have optimised our mask and can now present a version 2.0. It is available in white and night blue with a white pattern. The mask is washable at 60°C. The mask is used with insert membranes. These are basically for single use, but can be boiled (3-5min in boiling water) if desired. The mask is always delivered in a set. One set contains: - 1 cotton mask - 40 Insert membrane So you should have no problem getting by with 1 set for 40 days.

You have the machine - We have the protective covering. Where expensive threaded spindles or slipways are exposed to harsh operating conditions or dirt, our customized elastc protective coverings are an efficient and economical solution.

Our protective covers are all custom made at our supply facility in Germany. We have bellows, round bellows, WMB spirals, roller band covers and wipers in our range.

Powerful, efficient and sustainable PROtop combines the highest levels of efficiency and compact housing with high durability and direct parallel connection without diode modules. This reduces costs and creates space in the control cabinet. Thanks to the powerful DCL technology, even difficult loads such as motors can be operated without problems and circuit breakers can be reliably triggered. The good communication capability allows permanent status monitoring and complete integration into control systems.

Fast, uncomplicated and practical implementation of your development – ready for testing and further development through to series production. Rapid prototyping allows early identification and correction of design errors, which shortens development time and significantly reduces time to market. - Fast implementation thanks to close cooperation - Specific implementation for practical testing - Flexible adaptation to your requirements

The Automation-Line AL i.MX8M Mini LTE, based on Arm® Cortex®-A53 and Arm® Cortex®-M4, expands the product portfolio of existing Linux computers for DIN-rail mounting. The intelligent gateway with LTE connectivity offers extensive communication interfaces and, thanks to its robust housing, is ideally suited for demanding control tasks as well as mobile and wireless IoT solutions. A key feature is the LTE Cat1 module, which ensures a highly reliable and fast connection for IoT applications. It provides an excellent alternative when integration into the company’s internal network is not possible. As standard, the AL i.MX8M Mini LTE is equipped with the secure, hardened Linux®-based operating system KontronOS as well as KontronGrid, a comprehensive IoT device management solution for edge devices. This ensures the highest security standards and protection of sensitive data.

PRT2 precision track systems are the ultimate product for combined circular and linear motion. Hepco’s Track Systems are available in oval, rectangular, and “S” bend configurations with multi carriages allowing different assembly operations as part of one continuous system. All elements of the range are available in stainless steel, allowing for extensive use in the food, medical and scientific industries. Hepco’s track systems are a cost effective alternative to traditional conveyor systems.

PTFE is a high tech plastic with extraordinary properties. PTFE means Polytetrafluoroethylene. This material has become famous especially under the trademark Teflon of DuPont. Two of the excellent characteristics are the chemical resistance and the physiological innocuousness unrivalled by the other plastics. The temperature resistance also reaches very good values, i.e. almost 300 °C, and the conductivity values as well. Thus, this material is not only very appropriate for seals but also for technical components of every kind in the chemical, pharmaceutical and food processing industry.

Highly trained service technicians look after your pumps professionally and around the clock, from installation to maintenance and repair. As an independent service provider, we can look after you regardless of manufacturer and type. Our long-standing cooperation with a wide range of manufacturers guarantees us access to technical documentation such as sectional drawings and spare parts lists as well as the supply of original spare parts. From standard pumps to technologically sophisticated special pumps, all of them are reconditioned and tested at our service centre with the shortest possible delivery times. The documentation of the repair and thus the traceability as well as the warranty for our work are standard with us. You can also benefit from our expertise when replacing or purchasing new pumps. Our engineering team will be happy to advise you.

The LÜTZE M12 connectors with Push-In technology, offer lots of advantages for many control cabinet and machine and plant manufacturers because they allow fast and fault-free wiring of prefabricated cables. The tool-free and direct connection, which does not require previous opening of the contact point, guarantees fast wiring. Thanks to the new Push-In-Technology, the insertion forces are very low, which greatly simplifies the connection. In contrast, the pull-out forces are higher so that all connections guarantee a high level of wiring security. Depending on the application, the LÜTZE M12 connectors are suitable for transferring signals, data and power in various versions, either with a straight or angled connector, with the option of shielded or unshielded versions. The angled version allows the cable outlet to be positioned in 45° steps compared to the pole pattern. The LÜTZE M12 connectors with Push-In Technology have the same design as the screw terminal technology and are designed for more than 100 plug cycles. LÜTZE uses a clear color coding system for the wires during assembly. All colors in the connection block are assigned for the actuator sensor area and for the field bus wiring such as CAN-Bus, PROFIBUS, Ethernet and PROFINET, according to the corresponding standards EN 60947-5-2. This means that firstly, it is almost impossible to confuse the PINS, and secondly there is no more need for time-consuming and error-prone recoding of the individual color codes. Advantages: - Always the best connection technology for your M12 application - Simple and tool-free connection with push-in technology - Up to 30% time saving compared to the conventional screw terminal connection - Better contact in case of vibration and shock load due to permanent spring pressure - No conductor sleeves required