With its 1, 2 or 3-phase power supplies from the Compact series, LÜTZE offers outputs ranging from 30 W to 2,400 W, and output voltages of DC 12 V, DC 24 V, DC 48 V and DC 72 V. The devices are therefore suitable for a variety of industrial applications. There are additional benefits of the LÜTZE Compact power supplies series. Their dimensions are reduced by 50 % despite high efficiency of up to 95 % with minimal power loss and heating. Compact Economy Compact 'E' for Economy is an economical (cost effective) series for all standard applications where the primary focus is on the price /performance ratio. Also, this 1-phase series does not disappoint with a high level of reliability and PowerBoost. The compact design makes it an easy choice. Compact Ultra The highlight for all applications in which a high level of reliability, low power losses and minimum space requirements are stipulated. An active PFC or PowerBoost up to 150% are a matter of course here. This series has no derating – full power up to a working temperature of 60° C. Compact Ultra – the smallest design by LÜTZE. Compact Universal Universal is the consistent continuation of the Ultra series. Regardless of the network or voltage – the Compact Universal's 1, 2 or 3-phase connections allow you to select the option you need. This significantly increases the flexibility and reduces the number of power supplies needed, allowing you to save costs and also improve the performance. Compact 3-phase 3-phase mains adapters of 960 W to 2400 W give the system enormous power. Small dimensions, large power reserves, and intelligent information are just a few of the many features. You can choose classic voltages, such as DC 24 V and 48 V, as well as 72 V.

The most complete laser station for permanent marking. From unit to small batch production to integration in a robotic cell. Compatible with Fiber, MOPA, Hybrid, or Green source. TOUCH SCREEN Just press the touch screen and the LW2 laser engraving machine enclosure takes care of the rest! The door closes automatically, the automated laser cutter is positioned at the right focus height, the marking is done in a few seconds and the door opens. This laser station does not require training. All you have to do is prepare your marking sheets and load them into the station via the USB port. COMPLETLY SAFE LASER MARKING SYSTEM The safety of the operator is our priority. This laser marking station is certified as a class 1 laser product, meeting all safety requirements, allowing use in unrestricted environments: integrated fail-safe relay, protective glass, door closure security, emergency stop, door fitted with sensors and anti-pinch system, optional extraction and filtration solution to protect users from dust and smoke and maintain marking quality. Mechanic and electronics are fully protected in a sealed box. Integrated alarms and controls. FLEXIBLE MARKING STATION Large marking area laser marking system with 3 sided door, marking of a large variety of parts, from small to big parts, from simple to complex shapes. LW2 laser engraving machine enclosure is compatible with all laser sources to offer you the possibility to mark on any type of material. We propose 2 software choices for the creation and control of your marking station to adapt to your needs and various and varied applications: Lasertrace & Laserstyle.

The M1-EMP inverter provides native connectivity to EtherNet/IP, PROFINET, and Modbus TCP networks without the need for optional hardware boards, reducing both cost and installation effort. Sharing the same form factor as the existing M1-ECT EtherCAT model, the M1-EMP supports 10/100 Mbps half and full duplex communication. It enables cyclic messaging that can be used in either pre-configured or freely mapped modes, as well as non-cyclic messaging for full parameter access. An external 24 V DC backup supply further improves reliability by keeping communication active even if the main power is interrupted. The M1 AC Drives series offers a comprehensive set of capabilities. It supports flexible motor control for induction motors, permanent magnet motors and direct drive applications, while integrated position control with a gear function makes it suitable for a variety of motion tasks. Energy-saving features help reduce operating costs, and built-in safety functions such as Safe Stop 0 (STO SIL3 PLe) support compliance with strict safety requirements. For users working with EtherCAT, the series also includes a model with FSoE STO functionality. Configuration and monitoring are simplified thanks to seamless integration with OMRON’s Sysmac Studio software and the OMRON Drive App, which allow setup, parameter adjustment and diagnostics to be carried out quickly and consistently. Available in power ranges from 0.2 to 30 kW across single and three-phase versions, the M1 family is already used in diverse industries including food and beverage, pharmaceuticals, material handling, environmental mobility, water treatment and energy. With the launch of the M1-EMP, OMRON extends this versatility by offering multiprotocol Ethernet communication as standard, ensuring easier integration into modern production environments.

MAC - The complete solution for medium to larger power ratings. With built-in mains power supply. Choose between model with or without brake. Also in IP65 version. Choose Expansion module from an extensive selection for any application. Motor size is: MAC400-D2 400W MAC400-D5 (with built-in brake) 400W MAC800-D2 746W MAC800-D5 (with built-in brake) 746W MAC1200-D2 1182W MAC1200-D5 (with built-in brake) 1182W MAC1500-G2 - 1.5kW MAC1500-G5 (w. brake) - 1.5kW MAC3000-G2 - 3.0kW MAC3000-G5 (w. brake) - 3.0kW MAC4500-G2 - 4.5kW MAC4500-G5 (w. brake) - 4.5kW Features: Absolute multiturn encoder without battery Real-time industrial Ethernet: Profinet, Ethernet/IP, MODBUS TCP, EtherCAT, Powerlink and SercosIII 2 RS422 channels for encoder in/output and SSI encoder etc. 6IO for capture of position, interrupt, counters, enable, timer and PLC functions Expansion module you can choose between: Basic Modules Programmable Modules Field Bus Modules High Speed Multi-Axis Modules Wireless Modules Industrial Ethernet Modules

JVL Industri Elektronik A/S is proud to announce a completely new generation of Mini-MAC (50-141 W) servo motors. This new motor family is based on previous designs and customer feedback collected for many years and offers a wide pallet of options and possibilities which makes this product fit into almost any application. Key features: - High dynamic servo regulator - Industrial Ethernets - 6 protocols - Absolute multiturn encoder unlimited down time (no battery!) - Safe Torque Off (STO) input - Wide supply range 7 to 48 VDC - Very energy efficient - Brake control (ext. brake) - 0 - 4000 RPM / 50 - 140 W - Protection class up to IP67 - Wide program of option modules - Connectors: M12 industrial What is new ? • Absolute multiturn encoder harvesting technology without battery or gear • Ethernet high performance similar to other MAC motors • More advanced FOC filter for lower noise and better motor performance • New Mosfet technology for higher efficiency and cooler motor • Encoder resolution 8196 CPR. Higher resolutions soon to come • STO or Brake connector optional

The MAC802, MAC1202 and MAC1403 represent JVL’s new generation of integrated DC servo motors. Designed for low-voltage operation from 12–60 VDC (typically 24–48 VDC), they combine motor, controller, power electronics and encoder in one compact unit. This significantly reduces cabling, cabinet size and installation time. Performance data: MAC802: approx. 750 W continuous power, 2.4 Nm nominal torque, up to 7.2 Nm peak, length approx. 156 mm. MAC1202: approx. 1180 W continuous power, 3.82 Nm nominal torque, up to 11.46 Nm peak, length approx. 190 mm. MAC1403: approx. 1500 W continuous power, 4.78 Nm nominal torque, up to 14.34 Nm peak, length approx. 200 mm. Peak power can reach up to 4500 W depending on the model. The speed range is 0–3000 RPM (max. 3600 RPM). Key features: Fully integrated design with built-in servo controller, power stage and battery-free multi-turn absolute encoder. Support for multiple industrial Ethernet protocols such as EtherCAT, Profinet, EtherNet/IP and Modbus TCP. Integrated ePLC for standalone, decentralized motion and application control inside the motor. STO safety function (Safe Torque Off). Robust industrial housing with IP55, optional IP66/IP67, and M12/M16 connectors. Wide selection of interface and option modules: RS485, traditional fieldbuses, digital I/Os, CANopen, IO-Link, wireless extensions and more. Application advantages: With their decentralized architecture and compact, all-in-one design, these motors are ideal for compact machinery, mobile or battery-powered equipment, and modern Industry-4.0 systems. They help to reduce wiring complexity, improve EMC performance and simplify installation.

The expertise of our specialists is ideally suited for the maintenance and repair of customer plants and machinery. Our demand-driven resources, combined with the customer’s process knowledge, result in an efficient and effective solution for the operator. Whether as part of a periodic service contract or on call for breakdown support, our services help you maintain high availability of your machines and systems. Our experience shows that requirements are as individual as our customers themselves: from servicing high-bay storage vehicles to ventilation systems — we step in wherever support is needed. By retrofit, we refer to measures carried out on an existing machine or plant that contribute to maintaining or even increasing its value. We can support you from planning through to implementation in the field of drive and control technology.

Our special machines are characterized by the highest quality and innovative technologies that optimize the production process and set new standards in terms of performance and reliability. From the initial concept to design and commissioning, we offer you comprehensive support to ensure that your machine is perfectly integrated into your production environment. Our services in special machine construction include: >> Individual machine development: we design and manufacture machines that are precisely tailored to your specific needs and processes. >> Process optimization: We use tailor-made solutions to improve your production processes and increase efficiency. >> Innovative technology: We use the latest technologies and high-quality materials to develop machines that are reliable and durable. >> Service & support: Even after commissioning, we provide you with comprehensive support to ensure that your machines are always running at peak performance. Whether it's automated production lines, complex special machines for special applications or individualized systems - we realize your vision and make your production fit for the future. Rely on tailor-made solutions that make your production more efficient, flexible and future-proof.

Moving a machine or plant from its old location to a new one often poses unforeseen challenges. Our service technicians are distinguished by their ability to meet these challenges with our knowledge and material and to enable you to achieve the shortest possible production downtimes.

Machines can cause high costs not only at the time of purchase, but also during maintenance if the upkeep is carried out poorly and repairs are necessary as a result. For this reason, we have specialised in the maintenance of machines and other production equipment, so that your machines retain their value for a long time and are spared breakdowns. With our flexible service and our high-performance offer, we ensure the optimal and smooth functioning of your plants and machines and in this way contribute significantly to the reliable and economical operation of your company.

Our Machine Vision department is an important pillar of our highly qualified company and consists of a team of exceptionally trained and experienced professionals who have extensive experience in the field of image processing. Our department is proud to carry out numerous joint projects with customers and offer customized and complex image processing solutions, to improve their automation systems. What sets us apart is our strong network of suppliers, which allows us to source and offer the best products for a wide range of applications including optical lenses, industrial cameras and lighting. By leveraging our robust partnerships, we ensure our customers receive premium components that are perfectly tailored to their specific needs and requirements are coordinated.

Intelligent collision avoidance and area surveillance with rugged 3D vision The Visionary AI-Assist is a reliable assistance system, for example for the operators of mobile machines. The solution is characterized by the combination of a 3D camera for distance determination and AI-based detection of people and can be used for collision avoidance: If people or objects are located in predefined warning fields, the sensor triggers a warning message. The data processing for this takes place on the device. The Visionary AI-Assist can also be retrofitted, and is easy to install and quickly integrated. The individually adjustable warning fields ensure smooth operation and efficient workflows. Visionary AI-Assist is also suitable for stationary area monitoring and navigation support on automated machines.