Cable protecting conduits in metal or synthetic material, liquid tight and non liquid tight

Our range comprises three different series: industrial trunking, installation trunking and automotive trunking. Your requirements for the stability and mechanical protection of the trunking system are crucial. Clean EMC seperation of signal und power cables must also be taken into account. A comprehensive selection of various moulded parts and different covers allows great freedom in the design and layout of machinees and systems. Choose the right product for every application form our selection of materials: galvanized steel, grey primed or brushed stainless steel 1.4310. No troublesome pulling through of cables. Sturdy construction, comprehensive edge protection, low-burr longitudinal edges and easy installation are common to all series. InduPart AG

Whether in drag chains or in industrial robots, cables and wires used in industry are often exposed to constant and dynamic movements. Tension, bending, high travel speeds and torsion put them under extreme stress. For such applications, there are highly flexible cables and wires that have been designed and manufactured specifically for continuous motion.

The automation industry is growing steadily - trends such as digitalization or Industry 4.0 offer a wide range of opportunities and are causing rapid change in the industry. As a result, the degree of automation in factories is continuously increasing and expanding to more and more areas - automation technology is becoming a key technology. The automation of measurement, control and regulation of plants usually means that productivity and profitability are increased. At the same time, this relieves and protects people from dangerous or physically demanding work - while maintaining consistently high quality and reliability. All components used must therefore meet the highest requirements in terms of speed, accuracy and reliability. At the same time, the components, including cables, wires and cable accessories, must be able to withstand high mechanical and dynamic stresses. As the world's leading manufacturer of cables and wires for automation technology, HELUKABEL is the ideal partner when the highest demands are placed on the transmission of signals and energy. We offer products suited to your application in the following areas: - Motor, Servo, Feedback and Hybrid Cables (One Cable Technology) - Robot Cables - Single Conductors and Control Cables - Data and Bus Cables - Industrial Ethernet Cables Whether a flexible cable for fixed installation or for occasional movements, with UL/CSA approval or according to NFPA 79, HELUKABEL offers the optimal cable solution. Call us at +41 5641 / 8151-5 or send us an e-mail at: contact@helukabel.ch

MuM helps companies to digitise existing analogue processes and eliminate media breaks in order to reduce errors and shorten development times. Design configurators: MuM implements specific product configurators for standardised yet customised products. These enable order-specific components, 3D models and manufacturing drawings to be generated automatically without the need for manual programming skills. MuM add-on tools: Going beyond the standard Autodesk suite, MuM develops its own add-on applications and industry-specific solutions that bridge gaps in the standard functionality and accelerate workflows (e.g. MuM PDM Booster, MuM Multitool). PDM/PLM process optimisation: Using structured PDM and PLM systems, Mensch und Maschine optimises approval, change and revision processes relating to product and design data. Information is managed in a traceable, rule-based and secure manner. Whilst PDM brings design data under control, PLM goes one step further: It links product data, processes and departments throughout the entire life cycle, from the initial idea to series production. This enables all stakeholders to work from a shared data base, makes decisions more transparent and ensures that product development is scalable in the long term. Bidirectional interfaces: Mensch und Maschine implements interfaces between CAD, PDM/PLM and ERP systems. For example, data can be transferred from the PDM to the PLM and/or the ERP, and metadata as well as finished drawings, bills of materials or automated documents in formats such as PDF, DXF or STEP can be transferred to the ERP. This creates seamless data flows between design, work planning, procurement, production and other areas of the business. Would you like to optimise your existing CAD workflows? We would be delighted to show you which specific automation tools will deliver the greatest time savings for your particular scenario.

Thanks to the improved inline calibration process, the TCC achieves an accuracy of ± 0.2 K across the entire measuring range. This makes it perfectly suited for use in temperature-sensitive processes such as food, rubber or carbon processing. Besides, the TCC ensures a smooth process and a high product quality by permanently monitoring its own reliability. If the sensor deviates from the individually defined tolerance values or in the event of a sensor malfunction, it provides a corresponding signal via the clearly visible LED and the diagnostic output.

We also offer first-class calibration and certification services for torque tools such as those from Tohnichi, ITH and HS-Technik. Our services at a glance: All products are delivered with a free calibration certificate, so they are ready for immediate use. After a specified period of time, we can check your tools and issue a new calibration certificate if required. Expert calibration and timely repairs ensure that your equipment achieves maximum service life and your overall costs are reduced in the long term. Documentation is also carried out here with the help of special test programmes from the various manufacturers.

We have a laboratory accredited by SAS for torque and force measuring devices (up to 1000Nm / 1000N) according to the ISO / IEC 17025 standard. This service is aimed at industrial and commercial companies that have measuring and production equipment calibrated periodically. With our SCS calibration certificate or the factory test report, we confirm the perfect functionality of your devices. We offer a fast turnaround time to get your equipment back in use as soon as possible.

As a specialist in PC-based control technology, Beckhoff is constantly looking at ways to integrate all machine functionalities consistently into a single control platform. This also includes image processing on the software side since the launch of TwinCAT Vision in 2017. With the introduction of the comprehensive Vision hardware portfolio, this product area is now complete.

Küffer Elektro-Technik AG is a system integrator for the energy measurement technology solutions of Camille Bauer Metrawatt. Camille Bauer Metrix AG presents itself as an internationally active company with a clear focus on its core business: high-voltage measurement technology, angular position measurement and process instrumentation for industrial applications. As one of the leading providers in this segment, the company is committed to making its customers’ electrical processes more efficient and safer across generations — a commitment reinforced by the delivery of high-quality measurement technology. With its specialised instrumentation and comprehensive system solutions, Camille Bauer Metrix AG is able to monitor all “invisible” parameters within electrical energy and distribution processes. This ensures a stable energy supply and contributes significantly to the prevention of damage to personnel and assets.

For over 120 years, Camille Bauer Metrawatt AG has stood for high-quality measurement technology and innovative solutions. The Wohlen-based company is a leading provider of power, angle, and process measurement technology, serving customers worldwide. Swiss precision and quality are the hallmarks of Camille Bauer Metrawatt. The company's products are used in power generation, distribution, and consumption, as well as in industry. They contribute to improving the efficiency and safety of electrical systems and processes. Innovation and customer focus are Camille Bauer Metrawatt's core values. The company continuously invests in research and development to provide its customers with the best possible measurement technology. A strong focus on customer service and support rounds out the company's profile. Camille Bauer Metrawatt AG is part of the GMC Instruments Group, a global company headquartered in Nuremberg. The GMC Instruments Group brings together several renowned measurement technology brands under one roof and offers a wide range of products and services for a wide variety of applications: - Healthcare - Mobility - Industrial Infrastructure Camille Bauer Metrawatt AG: Your partner for high-quality measurement technology.

Schluss mit Netzwischern, Brownouts und Unterbrechungen bei Netzersatzanlagen! Mit dem CAPTEC 2401 bringen wir ein neues Puffernetzgerät auf den Markt. Das All-in-one-Gerät ist zum einen ein Netzpuffergerät und zum anderen eine USV/Puffermodul. - Eingangsspannung: 115-230 V AC, Ausgangsspannung: 24 V DC - Leistungsdaten: 1,3 A / 0,6 kJ  / 27 Sek. Pufferung für 1 A - spezielle Eigenschaften: Netzgerät für induktive Lasten, große Anlauf- / Anzugsströme - Überlastfähigkeit: 5 A für 100 ms  / 10 A für 10 ms - integrierter elektronischer Leitungsschutz