The spiral tube heat exchanger essentially consists of a jacket and a spiral tube bundle. The finned tubes are built into a spiral in the jacket, which creates a long thermal path. Spiral finned tubes produce high levels of turbulence that help reduce contamination. The bundle tubes can expand optimally. Flow rate: 1-300m3 / h Operating pressure: 16-40 bar Connections: 11/4 “-DN 150 Recommended max. Temperature difference: 150 ° C Materials: 1.4401 / titanium benefits High performance: Spirally finned tubes compactly installed, give the heat exchanger a large exchange surface with a high thermal output. Compact and light design, large number of different models and equipment for different applications. applications Different applications: Applicable for a wide range of different pressure, flow and temperature conditions. Ideal for steam and hot water, district heating, swimming pool Stock Up to DN 100 material in stock

SRB200EXi-1A

ST series safety sensors are suitable for the monitoring of protective devices on machines without inertia and allow the system in which they are used to reach a safety category up to SIL 3, PL e and Category 4. These sensors use RFID technology and provide high protection against any manipulation thanks to a unique code transmitted by the actuator. Since they have no mechanical elements, they guarantee a long service life even in applications with frequent operating cycles and under harsh environmental conditions. Their protection degree is rated IP67 and IP69K and they mantain the maximum safety level PL e, even when connecting up to 32 sensors in series. It is possible to choose among 3 kinds of actuators with different fixing and actuating directions. This means that the sensors can be installed on all types of machines and guards, both large and small.

STABURAGS NBU 30 PTM is a water-resistant assembly grease containing solid lubricants that specifically combats fretting corrosion. It is ideal for outdoor applications exposed to high levels of moisture. The product has proven itself as an assembly grease for clearance fits, water and hot water fittings, and sliding guides – particularly on filling machines, valve spindles, and cylinder guides. It can also be used for bolts, spindles, screws, and other sliding guides.

The easiest-to-use palletizing software on the market. - Proprietary software built on client needs - Intuitive touchscreen interface - Live view of palletizing progress

Our patent-pending STACKiT AI Vision brings Depal & Repal to a new level. Engineered for maximum versatility, STACKiT AI Vision offers true Plug & Play with automatic calibration, eliminating manual configuration, supports automatic variable multipick, optimizes operations with intelligent path planning, and provides 3D visual feedback.

Nodka Stainless steel Multi-touch Panel PC/Monitor is designed to meet the challenges in critical environments, offering centralized control, high reliability, enhanced performance, real-time data processing, scalability, data integration, reduced downtime, energy efficiency, safety enhancements, and robust connectivity, all tailored for efficient, flexible, and reliable automation and process control. It supports a wide operating temperature range from -20°C to 60°C and can withstand vibration. The rugged stainless touch panel PC, combined with a full IP69K rated water/dust-proof enclosure and 6 x M12-type connectors, can resist ingress of high-temperature steam and pressure washing, well suited for food and chemical industry, as well as outdoor applications such as gas station or parking management system. Nodka Stainless steel series products has been tested strictly by our own certificated laboratory. The tests included: high/low temperature humidity test, tumbling test, drop test, general vibration test, EMC safety test, water resistance test and impact test. The stainless design protects all connections and cables against contamination and chemical influences. Nodka Stainless Multi-touch product series is control and operating devices that meet strict hygiene requirements, which is quite important in the pharmaceutical, agriculture, food, beverage and chemical industries. Nodka's industrial Stainless panel PC/Monitors are custom-made with neutral from panel and multiple expansion slots to fit with custom needs in industrial and IOT applications. • 5+ Year Product Life Cycle • Original Design Manufacturer • Netherlands Technical Support and services • Small order and delivery sample within 8 working days

Zur Absperrung von Durchgangsventilen mit unterschiedlichen Handraddurchmessern, aus beständigem Polypropylen – ausgezeichnete Schlag- und Chemikalienbeständigkeit.

The V-Cell is a compact automation module. The robot unit can be used for various purposes. For example, welding, handling and machine placement are among the most common applications. The V-Cell 100 is offered in the compact design as a standard module. This is characterized by space-saving design and easy transport possibilities with forklift or pallet truck. Due to the high flexibility of our equipment and staff, we can adapt the standard module to almost any customer requirement. So do not hesitate to contact us.

Safe sensorless standstill monitoring The safe sensorless standstill monitor UG 6946 from the SAFEMASTER S series detects the standstill of 3-phase and 1-phase motors independent of the direction of rotation. This means sensors such as encoders or proximity switches are not required. Access to the danger zone of a system is only possible by the enabling signal of the standstill monitor after the drive has been switched off and run down. In order to detect a standstill, the remanence voltage induced by the motor windings is evaluated and provides safe standstill monitoring up to Cat. 4 / PL e or SIL 3, even if the motor has already been switched off. Using a conventional release via a time control, dangerous movement could not necessarily be excluded. For the implementation of different operating modes, the standstill monitor UG 6946 also offers the possibility of bridging the standstill monitoring (muting). The simple integration into the machine and drive concept reduces the commissioning effort and costs and is particularly suitable for use in machine tools and woodworking machines, centrifuges and rolling drives. With a width of only 22.5 mm, the UG 6946 can be accommodated in the control panel even under tight space conditions allowing easy retrofitting. The device also offers two redundant safety contact paths and a forcibly guided signal contact.

With the growing complexity of automation software, code quality assurance is becoming increasingly important. SIGMATEK's LASAL CLASS engineering tool now offers an optional “Static Code Analysis” (SCA) extension for checking control code created in Structured Text. SCA checks the code base for possible runtime errors and undefined behavior, such as uninitialized variables, returning a pointer to a local variable, implicit conversions, etc. – without having to execute the code. A large number of different, simultaneously running test rules analyze a wide variety of aspects of the control code and identify any quality defects, non-compliance with guidelines, or violations of internal coding standards at an early stage. Trivial errors that are often difficult to find can be prevented by using SCA, reducing the workload on the team and increasing productivity and software quality, not only during development but also during maintenance. Users have very flexible configuration options: each of the more than 50 predefined rules for variables, types, functions, and methods can be parameterized individually. The tool can also calculate metrics. Metrics are measures that evaluate various aspects of the code base. Fully configurable naming conventions are also possible. The rules, metrics, or naming conventions can be enabled or disabled – both individually and in groups. Automated basic checks allow reviewers to focus on the correctness of the logic and architecture. The analysis in a separate output window clearly displays error messages, which can be double-clicked to jump to the corresponding location in the code. Configurable, color-coded priority levels for individual errors in the output provide clarity. Error output can be suppressed line by line using code comments.

Whether in the building trade or in industry - we are your contact for the implementation of projects and tasks. We deliver simple constructions or solutions for complex steel structures, combined with high requirements for assembly in production plants, reliably and professionally. Our infrastructure enables us to produce in steel, stainless steel, aluminium and in combination with other materials such as glass, wood and plastic. We regard the introduction of pioneering and progressive solutions as our daily challenge in order to provide you with the desired added value. One of our specialities is the production of complicated platforms for industry and trade.

Do you need a higher torque? No problem - we can supply you KannMOTION with a matching gearbox. The same functions and the same promise remain: Simplicity, flexibility and short time-to-market are guaranteed. Which reduction ratio should it be? Angular gearbox or worm gearbox? Whatever you need, we make it possible. The promise of the KannMOTION remains: It can do what it needs to do - and do it perfectly.

stepsERP is the ERP system for industrial services.

SSP's stereo camera can be used in different ways: It can search for a single object in the image and measure it in space, or it can locate multiple objects of the same type and measure each individually, and finally, depth information can be determined for the entire image. Overall, the stereo vision system is an inexpensive, extremely flexible and very precise solution for object detection and localization.